CAN Bus 24 Development Kit

This kit enables users to begin CAN network development with Microchip's PIC^® PIC24 and dsPIC^® DSC families. The development kit includes the powerful PCWHD Integrated Development Environment with compiler support for Microchip's 8-bit and 16-bit PIC^® MCU families and an ICD-U80 in-circuit programmer/debugger that supports C-aware real time debugging. The prototyping board has four nodes nodes and includes a PIC24HJ56GP610 with two on-chip ECAN controllers, a dsPIC30F4012 connected to an MCP2515 CAN peripheral, and two MCP25050 CAN expanders. CAN drivers and example code are also included.

Node A: A PIC24HJ56GP610 which includes an integrated CAN peripheral. Note: Only the can-PIC24 driver can be used with node A.

Node B: A dsPIC30F4012 connected to an MCP2515 (external CAN peripheral SPI interface).

Node C & D: MCP25050s (stand-alone CAN expanders) pre-programmed by CCS to respond to specific CAN IDs.

Nodes A-C have potentiometer, three LEDs and three pushbuttons connections. Node D is connected to a 7-segmented LED.

An extra CAN transceiver has also been left open to connect the CAN Bus Prototype board with other CAN systems.

CAN Bus 24 Prototyping Board (Size: 3.27" x 4.80") includes:

• PIC24HJ56GP610
• dsPIC30F4012
• 30 I/O (8 Can Be Analog)
• MCP2515
• Two MCP25050
• Three Potentiometers
• Nine LEDs
• 7-Segment LED
• Two RS-232 Ports
• RS-232 Level Converter
• Two ICD Jacks

CAN Bus 24 Development Kit includes:

• CAN Bus Prototyping Board
• In-Circuit Debugger/Programmer
• Exercise Tutorial
• 9V AC Adapter
• Two Serial PC to Prototype Board Cables
• ICD to Prototype Board Cable
• USB PC to ICD Cable

Click here to view the Prototyping Accessories.