CCS C Software and Maintenance Offers
FAQFAQ   FAQForum Help   FAQOfficial CCS Support   SearchSearch  RegisterRegister 

ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

CCS does not monitor this forum on a regular basis.

Please do not post bug reports on this forum. Send them to CCS Technical Support
3.2inch TFT LCD module with touch panel
Goto page Previous  1, 2
 
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion
View previous topic :: View next topic  
Author Message
dyeatman



Joined: 06 Sep 2003
Posts: 1948
Location: Norman, OK

View user's profile Send private message

PostPosted: Sat Jul 09, 2011 10:08 am     Reply with quote
The TFT DISPLAY is 3.3V NOT 5V, therefore the signal pins on the DISPLAY
are 3.3V level and cannot handle 5VDC.

If you want to power the TFT Display with 3.3V you will have to bypass the
regulator IC. If you don't know how to do this please don't ask, you will
need to find someone with electronics experience to help you.

Bottom line:
You must POWER the DISPLAY BOARD with 5VDC. All the CONTROL SIGNALS must be 3.3VDC.
_________________
Google and Forum Search are some of your best tools!!!!
Bilal



Joined: 24 Apr 2010
Posts: 75
Location: Islamabad

View user's profile Send private message Send e-mail

PostPosted: Sat Jul 09, 2011 10:48 am     Reply with quote
thanks for your help dyeatman..
_________________
...
Display posts from previous:   
Post new topic   Reply to topic    CCS Forum Index -> General CCS C Discussion All times are GMT - 6 Hours
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group