| View previous topic :: View next topic |
| Author |
Message |
Dinesh
Joined: 15 Jul 2005
Posts: 22
Location: UK
|
| ICD-U40 - What firmware to use |
 Posted: Fri Jul 15, 2005 12:54 pm |
 |
|
I am new to CCS PCWH compiler and the ICD-U40.
I have downloaded the lastest updates but I am not sure where I can find the lastest firmware updates for ICD-U40. I have updated the driver and ICD sw.
On selecting debug from the compiler, I get a message that the ICD firmware is old and that i need to update it.
I noticed that latest firmware (2.01) in the ..\PICC directory is only 220k in size whilst the older (1.39) is 500k.
Can any one confirm this and what firmware should I be using to debug PIC18F452.
If a new firmware is required, where can I find it?
Thanks
- Dinesh  |
|
 |
treitmey
Joined: 23 Jan 2004
Posts: 1094
Location: Appleton,WI USA
|
|
| Posted: Fri Jul 15, 2005 3:52 pm |
|
|
When I bring up ICD program alone. On the bottom it says
CCS 1.39 REV#96 for PIC16 PIC18
This works great for me doing 18F452 |
|
|
Nandini
Joined: 13 Jul 2005
Posts: 15
|
|
| Posted: Tue Jul 19, 2005 3:22 pm |
|
|
| 1.39 is the latest ICD firmware. If the software complains it might be an issue with the software which would be fixed in the next release. Ignore the warning for now. |
|
|
PICbastler
Guest
|
| How to disable the Firmware-Warning? |
| Posted: Tue Aug 02, 2005 9:10 am |
|
|
Hello,
I�ve the same problem. My ICD-U40 uses the F/W 1.39.
After compiling there is the warning about the Firmware.
How can I disable this warning?
 |
|
|
Guest
Guest
|
| Firmware warning |
| Posted: Sun Aug 14, 2005 11:38 am |
|
|
| remove icd-images-firmware-02-02.fw |
|
|
|
FAQ 
Search
Register
Profile
Log in to check your private messages
Log in
