Search found 87 matches

Thank you Ttelmah

I will look it carefully.
I knew that here I find the answer

Pekka Ritamaki

OK Ttelmah.
I wanted to do it some other way.
The basic control is here https://probyte.fi/servoControl.jpg

Hopefully you can give me a new control system.

Pekka Ritamaki

Do you mean how often I do the motor controllers?

This is the first time, when I have done this kind of the controller.
I will go to my friends friend, who is keeping car repair shop. I have not ...

Hey. I am doing motor generators as a voltage adjustments.
It should adjust the 230VAC.
They are used as heaters, so the adjustment is not very accuracy.
I did the other (23kW) with step motor.
...

Ttelmah
You know exactly as it should be.

I have tried with four micrometer devices and asked help from Mitutoyo, but no answer.

There is some problem.

I can't find any information of RD, ...

I have four different micrometer
One is round 543-601B original Mitutoyo. It 5mm length
One is about 40 years old Mitutoyo Absolute Digimatic the model has already removed, Oy is normal 150mm length ...

Hey, I have tried to read Mititutoyo micrometer with PIC18F2550, with 20MHz crystal with USB connection.
I know that it is not an easy case, although I did it 1988 to Finnish paper factory. I need o ...

LCD problem solved!

I got today LCD working.
It was Enable bit was open.

I had not operating PIN_C4 and I changed it to PIN_C5,
but it was under trimmer potentio meter and it was difficult t ...

OK
I found flex_lcd.c in here.
I modified it and tried with my LCD driver.

It worked !
The display was not clear, but there was some charters.
And two rows!

Then I tried it second and mo ...

Temtronic
Thank for help.
I removed all WDT functions and cleared other not used parameters
I tried to load it to my PCB, but it doesn't work.

[/code]

/*==================================== ...

I deleted INT_RDA off, but it has no meaning
The serial code is following:

LCD init end
Program start
Program start
Program start
Program start
==
The CCS LCD example is quite differen ...

I have 5.115 version of CCS

Pekka

Hey. I have tried to solve this problem about two weeks.
I do level meter, but then I needed to use PIC18F2620.
It seems to be simple to replace PIC16F886.

My meter is here http://probyte.fi/L ...

I use normal LCD modules, but there is not a real datasheet
https://www.tme.eu/en/details/rc0802a-biy-esx/lcd-alphanumeric-displays/raystar-optronics/

The right place is https://www.probyte.fi/product_orientation.jpg

Pekka