Search found 179 matches

RN4677 vs. RN4020

The RN4677 is the new module Microchip are selling. Would this be a compatible Bluetooth to use in-place of the RN4020 ?

Thank you for your reply, I guess that I was thinking that to login for programming feature (ie setup device parameters input/output) different to user function.
In a closer look, setup password wou ...

Hi, new to this type and looking forward to development into the BT interfacing. I guess my question is, in due course would there be development into the App that is designed to How I would like or w ...

http://www.ccsinfo.com/forum/viewtopic.php?t=31639&start=90

Hi,

i noticed a problem with SPI "pin_select" ...

#include <33FJ12GP202.h>
....

#pin_select SDI1=PIN_B13 // ** THIS LINE FALLS IN ERROR ! **
#pin_select SDO1=PIN_B14
#pin ...

I believe it does do as microchip suggest, confirmation can come from CCS support, Confused

I had a look through my old email from CCS Support when I first tried to do Pin select and was not able ...

http://www.ccsinfo.com/forum/viewtopic.php?t=33062&highlight=pinselect

this link shows the #pin_Select as shown below sample

//********** ASSIGN PIN TO PERIPHICALS
//RS232 PINS
#Pin_selec ...

check the misc in the download section Confused

http://www.ccsinfo.com/compilerupdates.php

try
http://ww1.microchip.com/downloads/en/DeviceDoc/Ethernet%20PICtail.zip
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=1406&dDocName=en024858&part=DM240001
...

hi,

is it possible to use USB interface to act like TCP/IP Ethernet.
for instance able to get a web page on the micro/SD and display on the PC/internet web explorer Question

thanks

after thinking about this, you have confirmed what I thought would be OK to set, yes I will set the unused pins as an output and will properly set output to low.

It is just I fou ...

Just a quick question,
is it better to ground any unused PINs or just leave them floating.
I an using the 24FJ256(BG)106 I will be using about 1/2 on a particular project.

Or can I have the unus ...

I was thinking the same, should be OK, and yes it will be going via a transistor.
Has anyone do this this way before. Confused

Hi,
just a little of programing but to a hardware question.
the sample hardware from microchip on the PWM shows PWM pin to a 1K resistor with a .1uf cap to ground to get a average voltage out.
is ...

these may be of intrest
http://www.freedownloadscenter.com/Programming/Misc__Programming_Tools/Free_Serial_Port_Monitor.html

http://www.serial-port-monitor.com/